Tap & Mixer Repairs

From a tap that won’t stop dripping through to a stiff mixer or a leaking kitchen spout, Newton Huang handles every kind of tap and mixer repair across Melbourne’s eastern suburbs. We re-washer traditional taps, replace ceramic cartridges, O-rings and seats, and install brand-new WaterMark-approved taps and mixers when the old gear’s beyond saving. Tidy work, no leaks left behind, and we’ll match the finish if you want like-for-like.

Book a Tap Repair

What a Tap or Mixer Repair Covers

  • Usually the brass seat under the washer has corroded or scored, so even a brand-new washer won’t seal. We reseat the tap with a reseating tool to give the new washer a clean surface to press against, or convert it to a tap cartridge that doesn’t rely on a seat at all. In older taps where the body itself is worn through, a like-for-like swap is the only real fix.

  • Most mixer issues are cartridge issues, and a quality replacement cartridge is much cheaper than a brand-new tap. We carry common Methven, Caroma, Dorf and Phoenix cartridges on the van. If the mixer body is corroded or out of production, a swap-out becomes the smarter long-term option — we’ll quote both so you can choose.

  • If you’ve got matching tapware on a vanity or kitchen, we can usually replace a single tap and match the finish. For mixers, the body is one unit so a replacement covers the whole mixer head. We’ll always check before quoting — sometimes a single-part repair is the smarter move, sometimes a full set swap saves you money down the track.

  • Low hot flow is usually one of three things: a blocked aerator on the spout, scale build-up inside the cartridge, or a tempering valve at the hot water unit that’s reached end-of-life. We work through them in order — cheapest to most involved — so you only pay to fix what’s actually wrong.

  • We do our best to match brand, model and finish (chrome, matte black, brushed nickel, brass) so the new tap blends in with the rest. For older or discontinued ranges an exact match isn’t always possible, so we’ll bring photos or model options before installing. Most customers prefer to update the whole set if one tap is going — we’ll quote both ways.

Every tap and mixer repair we do — from a quick washer swap to a full mixer cartridge replacement or like-for-like tap installation — follows the same thorough process. Here’s exactly what you can expect.

Service Areas

Our tap and mixer repair work covers Vermont, Vermont South, Mitcham, Blackburn, Blackburn North, Blackburn South, Glen Waverley, Mount Waverley, Wheelers Hill, Ashwood, Ashburton, Surrey Hills, Mont Albert, Mont Albert North, Box Hill, Box Hill North, Box Hill South, Burwood, Burwood East, Forest Hill, Heatherdale, and Donvale.

Our Process

Phone Triage — Tell us where the tap or mixer is, what’s going wrong, and whether it’s a brand we’d need to source a cartridge for. We’ll quote on the call where possible.

On-Site Diagnosis — We arrive, isolate the supply, strip the tap or mixer down, and identify exactly what’s failed before any work starts.

Repair or Quote — If it’s a part that’s on the van, we repair on the spot. If it’s a full mixer or matched-finish swap, you get a written quote before we proceed.

Finish & Check — We reseal, recommission, pressure-test the repair, and clean up. No leaks, no drips, no mess left in your kitchen or bathroom.

  • "Always delivers. Nothing is ever an issue, fast response, quality work. Just gets things done perfectly first time. Finally a trade we can all rely on."

    Peter - Burwood

  • "The best plumber in Melbourne's east. Always on time, always perfect work. Pricing is great, easy to deal with. You'll be thrilled when you use Newton for your work."

    Bryan Grice - Mitcham

  • "Newton is friendly, helpful, down to earth and professional. He has sorted out my plumbing issues with a minimum of fuss on a number of occasions. I have no hesitation in recommending him to solve any plumbing problems which you might have. Give him a call."

    Kay Toll - Glen Waverley

No Call centres. No subbies. Just Newton, on your job.

Meet Newton

When you ring Newton Plumbing, Newton picks up. When you book a job, Newton turns up. The phone, the quote, the experienced advice, the quality work, the follow-up - it’s the same bloke every time. Newton.

With over 15 years experience across Residential and Commercial, Newton prides himself on service excellence, quality workmanship, forming long-term relationships with his customers and ensuring value for money.

Plumbing Licence: #107733 Service Areas: Melbourne East, Melbourne CBD

Let’s Work Together

If you're interested in working with us, complete the form with a few details about your project or simply give us a call. We'll discuss your project, your home and your plan and work together on the best installation and value for money.

Call Newton Plumbing